Because the factory’s electric smoke vent plays an important role in the ventilation and smoke extraction of the factory, it is widely used in electronics, manufacturing, logistics, warehousing, logistics, automobiles, furniture, spare parts and other industries. In the relevant technical specifications what are the requirements?

1. Applicable area of ​​the factory's electric smoke vent rooflight

Before installing the electric smoke ventilator in the factory building, we must consider the applicable area of ​​the smoke ventilation on the project site. Generally speaking, the electric smoke vent of the factory building is suitable for installation in non-seismic areas or earthquake areas with seismic intensity design ≤ 7 magnitude. Because the seismic requirements of different regions are different, the smoke vent manufacturers must fully consider the actual situation of the project location before designing it.

2. Wind and snow load of automatic opening vent

Because the climatic conditions in the north and south are very different, the design must be fully combined with the specific conditions of the project site. In areas with typhoons and rains in the south, what needs to be considered is the wind load that the smoke and heat vents on the steel roof can withstand. Especially in extreme weather, the smoke vent can operate without affecting the normal production of the workshop.

3. Waterproof performance of roof smoke and heat vents

The smoke ventilator is installed on the roof of the factory building. If the waterproof performance is not enough, it will cause rain leakage, which will seriously affect the production of the factory workshop. Therefore, the smoke vent system needs to adopt the waterproof technology of "nail-free and water-free waterproof structure". The sashes of the smoke vent is all structurally waterproof. Silicone and tape are not used for waterproofing, which fundamentally solves the hidden danger of leakage.