MCW1 roof louver vent is a type of ventilation skylight window that is frequently consulted by business owners. Because the low-profile ventilator has better performance advantages, it is widely used by clients.

1. Low window height and good wind resistance

The window height of MCW1 roof louver vent is low, generally no more than 850mm, the conventional window heights are 560mm, 600mm, 650mm. Compared with streamlined natural ventilator, thin natural vent has better wind resistance and are suitable for coastal areas with heavier wind loads.

2. Three-layer rainproof board, good rainproof performance

The MCW type natural vent is equipped with three-layer rainproof board, which can effectively prevent rainwater from falling into the room. In the case of heavy rain carried by strong winds, no matter what angle it is falling from, when splashing is formed on the upper or middle rainproof board, the splashed rainwater will also fall on the next rainproof board, and finally gather in the one-piece formed The lower rainproof board and drainage channel flow out to both sides of the opening and discharge to the outside. The MCW1 thin natural ventilator has good waterproof and anti-drifting effects.

3. Install the open-closing valve plate, the ventilation and smoke exhaust can be controlled

The MCW1 type roof louver vent can be equipped with an electric valve plate. When the electric valve plate is opened, the low-profile ventilator can realize the exchange of indoor and outdoor air circulation, and can control the opening angle of the opening and closing valve plate according to the actual situation of the workshop, and reasonably realize the ventilation volume required by the workshop and workshop.