The design principle of the roof louver vent is mainly to accelerate the air circulation according to the heat pressure generated by the temperature difference between indoor and outdoor to achieve a good ventilation effect. Mcwell has devoted himself to researching roof smoke vent for many years. Based on the original design principles, it has made technical improvements to natural vent and is widely favored by customers.
The original ventilation design principle of
roof louver vent is to try their best to lower the position of the neutral plane, the main reasons are:
1. The location with low surface, which means that when the fresh air enters the factory outside, basically all or all of the flow passes through the natural roof ventilation. Obviously, to reduce the temperature in the work area in the operation area, to improve the air quality, and to strengthen the natural ventilation of the roof ventilation air building, will play a decisive role.
2. The lower the position of the
roof smoke vent, the greater the distance of the exhaust port and the surface exhaust pressure, the greater the value of the height. Under the premise of a certain displacement, the means of increasing the exhaust pressure of the roof louver vent can reduce the opening area of the skylight of the exhaust port.
Mcwell has made technical improvements to the ventilation effect of natural roof ventilation from the following three aspects through the concentrated research and hard work of the professional R&D team, as follows:
(1) The factory's automatic extraction, residential heat and moisture, dust, smell, smoke, peculiar smell of chemical raw materials, make the air clean and comfortable.
(2) Effectively reduce the indoor, warehouse, workshop or workshop temperature up to 2-3 degrees, avoid summer heat stress and irritability, and alleviate the impact of high temperature on stored products or raw materials.
Release time：
info@mcwell.cc
+86 13881905158