Steel roof ridge vent is the basic ventilation equipment which is installed in many industrial plants in order to achieve good ventilation. High performance ridge ventilator can deliver fresh air to our industrial plants, promote the circulation of air in the factory area, and create a comfortable working space. Generally speaking, after the roof ridge vent is installed, it is necessary to debug the ridge vents to make sure it can operate normally. Mcwell will analyze the debugging steps.

1. During the trial operation of the steel roof ridge vent of the factory building, first turn on the main power supply, start the motor forward rotation to make the valve plate open to the normal position, and automatically stop; then start the motor, reverse rotation to close the valve plate to the normal position, and automatically stop; run twice continuously above.

2. it is necessary to ensure that the valve plate opens and closes flexibly.

3. After the valve plate is closed, re-fasten the reducer, reducer bracket, wire rope buckle and check the degree of expansion of the plate chain.

4, there should be no water leakage or splashing in the rain shield, drainage ditch, etc.

5. After installation, the site should be cleaned up.