The ridge ventilator is a natural ventilation facility installed on the building's roof. The specifications are relatively large. The throat is usually more than 2m. The throat of the larger ridge ventilation skylight can even reach 9-12m. Therefore, the installation of the steel roof ridge vent is relatively difficult to construct. During the construction process, there are some places that need to cooperate with the roof construction company to ensure the smooth construction of the ridge vents project and the effect of the skylight. Mcwell will introduce you the precautions that need to be coordinated with the construction company during the installation of roof ridge ventilator.

1. The natural roof ventilation is large in size and self-weight, so the foundation must be firm. We need to ensure the load-bearing foundation and design and installation specifications. Most of the ridge ventilator bases are installed by the roof construction company, while the ventilation skylights are connected to the base by bolts or welding. Therefore, the ventilation skylight manufacturers and The roof construction unit must fully communicate, and the specifications of the base and the skylight are highly compatible to facilitate the installation of the ventilation skylight.

2. Hoisting, storage of raw materials and roof protection during construction. Among the large and small projects that McWay came into contact with, some manufacturers of ventilation skylights with irregular construction did not pay attention to protecting the roof during the construction process, resulting in deformation and damage to the steel structure roof panels that have been installed by the roof construction company. As a result, both parties occurred. dispute. Mcwell pays special attention to safe and civilized construction and finished product protection, standard placement of materials, laying protective blankets during construction, and close cooperation with roof construction company.

3. For buildings with flexible roofs, the roofing construction party should communicate well with the smoke vents manufacturer. The curling edge of the flexible coil should be higher than the upper edge of the ventilator base, so as to facilitate the waterproof treatment when installing the ventilating skylight.
4. The waterproof treatment of the end of the roof ridge ventilation skylight should be done well, especially the waterproof treatment of the ventilation skylight and roof ridge tile to leveling specifications to avoid lateral leakage of rainwater in rainy days.