Streamlined natural ventilator is installed on the factory's roof and is greatly affected by the natural environment. They are exposed to heat and rain in the open air. Therefore, the maintenance of ridge ventilator is an indispensable link. Streamlined steel roof ridge vent is a major type of ventilation equipment commonly used in factory buildings. Effective maintenance methods can prevent and reduce the frequency of natural failures and accidents, fully enhance the efficiency of the ventilation equipment, and extend the service life of the equipment.

Precautions for maintenance of streamlined natural ventilator:

1. It can only operate when the streamlined natural ventilator is completely normal.

2. When the equipment is turned on after overhaul, it is necessary to pay attention to whether the various parts of the equipment can operate normally.

3. Clean the dust, dirt, water and other impurities in the equipment regularly.

4. Repairs to the equipment are strictly prohibited under operating conditions.

5. The top of the ridge ventilator must be overhauled and maintained.

6. After the steel roof ridge vent is used, each equipment should establish a maintenance log calendar, which serves as a basic reference for regular maintenance of the ventilating equipment.

7. After operating the electric actuator for a period of time, it should be inspected and repaired, and the grease of the ball bearing in the machine needs to be replaced, and the fullness should reach 70%.

8. When the motor fire limit switch cover needs to be opened, it must be done without power.

9. Check the accuracy and sensitivity of the control box, electric actuators and instruments.

10. Check the firmness of bolts and pins.