The ridge natural ventilator is a ventilation and smoke extraction equipment which is installed on the ridge of factory. During the installation process, there are many items that need to be paid attention to. Then, the editor of Mcwell will focus on the installation of the ridge ventilator.

1. Design of the specifications and dimensions of the ridge ventilator

Because the specifications and dimensions of the smoke vent skylights are designed according to the specific requirements of the business owner, the throat size range is large, including 1500-9000mm. If it is a large throat roof ridge vent, the construction is more difficult and it needs to be ventilated. The skylight manufacturer is responsible for the design, production and installation.

2. Installation of the base of the smoke vent skylights

Because of the large size of the smoke vent skylights with large throat, its own weight is heavier, it needs to be installed with the base, and the foundation needs to be firm. It is necessary to ensure the load-bearing of the ridge ventilator and the base of the roof ridge vent. Because the base of the steel roof ridge vent is installed by the construction unit, and the ridge ventilator is designed and installed by the ventilating building manufacturer, it is necessary to communicate fully before construction to ensure that the ventilators can be installed smoothly.

3. Waterproof treatment of steel roof ridge vent

The ridge ventilator is located on the ridge of the factory building. Waterproof treatment is the top priority. The ends of the natural ventilator must be waterproofed to ensure good sealing performance. Because the waterproof treatment of the ridge natural ventilators and the factory building ridges should be leveled and standardized to avoid leakage.